The breakfast eggs are allowed to cuddle all year round in a warm basket, but the colorful eggs at Easter want a big appearance? Today I will show you how you have one Diy egg holder potter can. Don’t worry if you don’t have a noun at home – this guide works also with sound for air drying!
Diy colorful Easter decorations – egg holder potter
For a long time I have been on my wish list beautiful egg holder made of ceramic, which I always encounter in various back videos. But do I put the eggs from the box in my egg holder before baking? I honestly doubt that! Now, however, I can try it out, because I spontaneously potted a few egg holder from a large rest of the tone. And since Easter is just around the corner, I also have one Happy, colorful variant for the Easter table made!
I used two different techniques and once simply painted yellow stripes and with the other egg holder the color diluted a bit and attached larger and smaller sprinkles in different layers.
Advertisement – this article contains affiliatelinks*
Material for the ovaries made of clay
For the ovaries for the Easter table you don’t need that much material. I used the following:
- Egg cartons from cardboard as a template
- Tone for air drying -You can also use modeling mass, but sound is usually available in larger packaging and you already need 500-750g for a large egg holder for 10 eggs. I use this sound/modeling mass* – can be burned, but also works for air drying and then becomes white. Also perfect for projects with children!
- Tool and Co. A base for rolling out, an old rolling wood (alternatively a wine bottle etc., without a label) and a knife.
- Acrylic paint and brush – I painted the egg holder with acrylic paint. To create sprinkles, I simply diluted the color.
- Coat – So that you can clean the ovaries, you should use a coat lacquer at the end.
The most beautiful Easter ideas – decoration and recipes
And before I give you that DIY egg holder potter to print out Show, you still come the most beautiful inspiration and the most popular ideas from the Easter category. Maybe you want to stop by there too?
10 tips for a nice Easter brunch with over 25 recipe ideas – all about the Easter break from sweet to hearty. Fast curd rolls, egg liqueur spread and much more.
Tinker DIY Easter gifts – small souvenirs, beautiful attentions and gifts from the kitchen for Easter.
Easter cake – bake quickly and easily. Delicious cakes that fit perfectly at Easter and can be easily prepared.
The best Easter desserts – easy to prepare and serve in the glass. Delicious with egg liqueur or rhubarb.
Simple Easter decorations – 12 simple craft ideas at Easter put you in a good mood.
Potter egg holder – the DIY to print out
This is where the DIY instructions come that you can easily print out. And if it gets too stressful for you now before Easter – just pin your picture! So you can find the article again and again and get started if you find the time. All my Easter ideas can also be found on the corresponding Easter Pinterst board.
Print PIN this idea
Split
Diy egg holder potter
Great DIY egg holder yourself – also works with a air -drying sound. Mölich and colorful also painted perfectly as a DIY Easter table decoration.
Crowd: 1 Egg holder
Material
- 1 Piece Ton (air trocknend) * Up to 750 g for an egg holder for 10 eggs
- 1 Eierkarton
- 1 Set Acrylic
- 1 Coatings
Instructions
-
Knead the sound for preparation and punch out air bubbles. If you want to burn the tone afterwards, it is particularly important that there are no air inludes in it. But it also makes sense for the air -drying variant, since air inclusions can form unsightly bumps.
-
Prepare the egg boxes by cutting them to the desired size and cutting the high tips.
-
Roll out the sound on a smooth surface approx. 6 to 7 mm thick. The piece should be at least 2.5 x as wide as the egg carton.
-
Cut an organic shape with a knife.
-
The cut edges with a little water and fingers smooth.
-
Now place over the egg carton and carefully press into the desired shape. Two opposite pages should touch the floor and shape a kind of stand so that the egg holder is later stable.
-
Everything smoothes and if you are unsure with an egg, whether it stops in the stand or tread. Then let it dry completely. Depending on the thickness and nature of the sound, this can take about 2 days.
-
Finally paint as desired. I initially primed the sound because the color moves in a bit and everything between different layers dried well. Fix with coating lacquer.
Notes
At the time of the time, the individual drying times are added!
Have fun tinkering
Jutta
Source: kreativfieber.de
